| 物品名称 | 规格型号 | 数量 | 单位 | 描述 |
|---|
| 高压油管 | M28*1.5/2-16-34/1500 | 10.00 | 根 | {"型号":"M28*1.5/2-16-34/1500","材质":"橡胶、钢丝","接头材质":"45#钢","接头尺寸":"28","接头形式":"平头","长度":"1500","压力":"32mpa","所属设备名称":"磷铁环压脱机","设备型号":"Φ400/Φ140","设备生产厂家":"沈阳沈京供水设备厂","国产/进口":"国产","使用寿命":"2年"} |
| 胶管总成 | 2S-16-1500 | 2.00 | 根 | {"型号":"2S-16-1500","图号":"无","材质":"内外层为合成橡胶,二层钢丝","接头材质":"碳钢","接头尺寸":"M30*2","接头形式":"内螺纹连接","长度":"1500mm","压力":"100bar","所属设备名称":"轧机","设备型号":"280/850*2000","设备生产厂家":"阿亨巴赫","国产/进口":"国产","使用寿命":"365天","特殊要求":"无","参照标准":"JB/T 6142.1-2007","备注":"到货验收标准:1.包装完好,内部备件无破碎及损坏.2.型号,参数等必须符合技术要求.3.升级型号的或替代型号的备件应带有升级或替代证明.4.若不符合技术要求或出现质量问题,则退换货,产生的费用由供货方承担."} |
| 高压软管 | 4SP*16*1200 | 10.00 | 根 | {"型号":"4SP*16*1200","材质":"*腈橡胶+四层钢丝缠绕","接头材质":"Q235","接头尺寸":"M30*2","接头形式":"螺纹","长度":"1200mm","压力":"26Mpa","国产/进口":"国产","使用寿命":"365天","特殊要求":"一直头一弯头,两端均为锥口，锥口直径：20mm","参照标准":"JB/T 8727-2017"} |
| 结晶器油管 | 2T06-1000-DKD | 30.00 | 根 | {"型号":"2T06-1000-DKD","图号":"无","材质":"胶管：*腈橡胶加1层普通钢丝；保护套：硅胶耐高温护套","接头材质":"普通碳钢","接头尺寸":"一端12x1.5mmH头，另一端圆锥外螺纹尺寸代号1/8英寸，每英寸牙数19","接头形式":"一端H头，另一端圆锥外螺纹","长度":"1050±15mm","压力":"1Mpa","所属设备名称":"铸造机","设备型号":"100T","设备生产厂家":"美国WAGSTAFF","国产/进口":"结晶器油管所属设备为进口","使用寿命":"60天","特殊要求":"无","参照标准":"GB/T 34204-2017","备注":"验收标准1.包装检查：产品必须要有合格证或出厂检验质量证明书，产品包装完整、无破损、潮湿、污染。2.核对合格证或质量证明书要与订货技术要求一致。3.对于验收检验不合格，按照采购协议要求进行退货或供应商免费更换。"} |
| 高压软管 | 4SHA25*18100 | 1.00 | 根 | {"型号":"4SHA25*18100","图号":"*","材质":"四层钢丝编织液压橡胶管","接头材质":"碳钢","接头尺寸":"M42*2.0","接头形式":"24°锥密封，接头为A型","长度":"18100mm","压力":"350bar","所属设备名称":"单机架冷轧机","设备型号":"2800mm","设备生产厂家":"西马克","国产/进口":"国产","使用寿命":"730天","特殊要求":"由于长期浸泡在轧制油中，要求软管和密封要有良好的耐轧制油腐蚀和阻燃性，管接头O形圈材质为氟橡胶，O形圈规格为25*2.5，到货验收：物资不满足技术要求退换货处理，退换货产生的费用由供货商承担","参照标准":"SN 756-2007"} |
| 高压软管 | 4SHA32*18100 | 3.00 | 根 | {"型号":"4SHA32*18100","图号":"*","材质":"四层钢丝编织液压橡胶管","接头材质":"碳钢","接头尺寸":"M52*2.0","接头形式":"24°锥密封，接头为A型","长度":"18100mm","压力":"350bar","所属设备名称":"单机架冷轧机","设备型号":"2800mm","设备生产厂家":"西马克","国产/进口":"国产","使用寿命":"730天","特殊要求":"由于长期浸泡在轧制油中，要求软管和密封要有良好的耐轧制油腐蚀和阻燃性，管接头O形圈材质为氟橡胶，O形圈规格为33*2.5，到货验收：物资不满足技术要求退换货处理，退换货产生的费用由供货商承担","参照标准":"SN 756-2007"} |
| 高压软管 | 4HA12*18100 | 2.00 | 根 | {"型号":"4HA12*18100","图号":"*","材质":"四层钢丝编织液压橡胶管","接头材质":"碳钢","接头尺寸":"M24*1.5","接头形式":"24°锥密封，接头为A型","长度":"18100mm","压力":"350bar","所属设备名称":"单机架冷轧机","设备型号":"2800mm","设备生产厂家":"西马克","国产/进口":"国产","使用寿命":"730天","特殊要求":"由于长期浸泡在轧制油中，要求软管和密封要有良好的耐轧制油腐蚀和阻燃性，管接头O形圈材质为氟橡胶，O形圈规格为13*2.0，到货验收：物资不满足技术要求退换货处理，退换货产生的费用由供货商承担","参照标准":"SN 756-2007"} |
| 胶管总成 | 2S-12-800 | 4.00 | 根 | {"型号":"2S-12-800","图号":"无","材质":"内外层为合成橡胶，二层钢丝","接头材质":"碳钢","接头尺寸":"M24*1.5","接头形式":"公制内螺纹","长度":"800mm","压力":"100bar","所属设备名称":"铝箔轧机","设备型号":"ф280/850*2000","设备生产厂家":"阿亨巴赫","国产/进口":"国产","使用寿命":"365天","特殊要求":"无","参照标准":"JB/T 8727-2017","备注":"到货验收标准:1.包装完好,内部备件无破碎、损坏.2.型号,参数,等必须符合技术要求.3.升级型号的或替代型号的备件应带有升级或替代证明.4.若不符合技术要求或出现质量问题,则退换货,产生的费用由供货方承担."} |
| 黄油枪软管 | 94-167-23 | 10.00 | 个 | {"规格型号":"94-167-23","图号":"/","材质":"耐压、防爆橡胶","所属设备名称":"手动黄油枪","设备型号":"94-164（400CC）和94-165（400CC）黄油枪","设备生产厂家":"无要求","国产/进口":"无要求","使用寿命":"365天","特殊要求":"无","参照标准":"CNS 11155-1984","备注":"1、历史编码：*，已封存。2、不合格的处理标准：如到货与技术要求不符，由供应商无条件更换、退货。"} |
| 胶管总成 | 2S-12-800 | 4.00 | 根 | {"型号":"2S-12-800","图号":"无","材质":"内外层为合成橡胶，二层钢丝","接头材质":"碳钢","接头尺寸":"M24*1.5","接头形式":"公制内螺纹","长度":"800mm","压力":"100bar","所属设备名称":"铝箔轧机","设备型号":"ф280/850*2000","设备生产厂家":"阿亨巴赫","国产/进口":"国产","使用寿命":"365天","特殊要求":"无","参照标准":"JB/T 8727-2017","备注":"到货验收标准:1.包装完好,内部备件无破碎、损坏.2.型号,参数,等必须符合技术要求.3.升级型号的或替代型号的备件应带有升级或替代证明.4.若不符合技术要求或出现质量问题,则退换货,产生的费用由供货方承担."} |
| 方形伸缩软连接 | 300*500*2000 | 3.00 | 个 | {"规格型号":"300*500*2000","公称压力":"1.6Mpa","膨胀节形式":"伸缩式","波纹管形式":"无","膨胀节端部形式":"法兰连接","10倍设计压力值":"无","公称直径":"300*500","长边":"500mm","短边":"300mm","总长度":"2000mm","轴向位移量":"1800mm","横向位移量":"无","材质":"边框:3mm厚Q235钢板,支撑框:Φ6钢筋.","波形节材质":"涂胶三防布+青稞纸","适用温度":"-70℃~+260℃","适用压力":"1.6Mpa","特殊要求":"钢筋支撑框间距200mm,边框和安装螺钉孔尺寸见图片.软连接最大伸长总长度不低于2000mm.耐高温,耐高压,导热均匀迅速.耐溶剂,耐老化,抗腐蚀,无毒无污染符合环保要求.耐用性强,可反复层压,使用寿命长.具有良好的缓冲性,回弹性好.","使用寿命":"730天","参照标准":"GB/T 1682-1994"} |
| 三层铠*燃气管 | Y200 | 600.00 | 根 | {"输送介质":"天然气","规格":"Y200","材质":"NBR、PVC、锌铁皮，表面被覆耐燃烧PVC材料","连接方式":"两头宝塔插口","被覆层材质":"PVC","被覆层等级":"阻燃等级为ul-94:v-0","参照标准":"GB 29993-2013","备注":"技术要求：1.工作压力：≤10KPa2.工作温度：-10℃-50℃3.长度：≥200cm4.接头外径：22mm。.接口内径：9mm。管外径：19mm5.插口适用于9-11.5mm宝塔头，带二个可调节卡扣6.使用寿命：8年到货验收：来货如因质量问题或与技术要求不符，供应商给予免费退换货处理"} |
| 国标公制内螺纹平面管接头 | FLAT-S-22-08/2SN | 50.00 | 套 | {"型号":"FLAT-S-22-08/2SN","图号":"无","材质":"20#碳钢","接头材质":"20#碳钢","接头尺寸":"M22*1.5","接头形式":"A型","长度":"50mm","压力":"27Mpa","所属设备名称":"通用设备","设备型号":"通用设备","设备生产厂家":"通用设备","国产/进口":"国产","使用寿命":"365天","特殊要求":"A型接头,接头螺纹尺寸:M22x1.5,适配内径12mm的2层钢丝缠绕胶管,接头含适配套筒","参照标准":"GB/T 9065.1-2015"} |
| 90°公制内螺纹平面管接头 | FLAT-S(90)-22-08/2SN | 50.00 | 套 | {"型号":"FLAT-S(90)-22-08/2SN","图号":"无","材质":"20#碳钢","接头材质":"20#碳钢","接头尺寸":"M22*1.5","接头形式":"A型90°","长度":"65mm","压力":"27Mpa","所属设备名称":"通用设备","设备型号":"通用设备","设备生产厂家":"通用设备","国产/进口":"国产","使用寿命":"365天","特殊要求":"A型90°接头,接头螺纹尺寸:M22x1.5,适配内径12mm的2层钢丝缠绕胶管,接头含适配套筒","参照标准":"GB/T 9065.1-2015"} |
| 公制内螺纹24°锥带O型圈重系列管接头 | DKO-S-30-10T/2SN | 50.00 | 套 | {"型号":"DKO-S-30-10T/2SN","图号":"无","材质":"20#碳钢","接头材质":"20#碳钢","接头尺寸":"M30x2","接头形式":"H型","长度":"53mm","压力":"27Mpa","所属设备名称":"通用设备","设备型号":"通用设备","设备生产厂家":"通用设备","国产/进口":"国产","使用寿命":"365天","特殊要求":"H型接头,接头螺纹尺寸:M30*2,适配内径16mm的2层钢丝缠绕胶管,接头含适配套筒","参照标准":"GB/T 9065.2-2010"} |
| 90°公制内螺纹24°锥带O型圈重系列管接头 | DKO-S(90)-30-10T/2SN | 50.00 | 套 | {"型号":"DKO-S(90)-30-10T/2SN","图号":"无","材质":"20#碳钢","接头材质":"20#碳钢","接头尺寸":"M30x2","接头形式":"H型90°","长度":"68mm","压力":"27Mpa","所属设备名称":"通用设备","设备型号":"通用设备","设备生产厂家":"通用设备","国产/进口":"国产","使用寿命":"365天","特殊要求":"H型90°接头,接头螺纹尺寸:M30*2,适配内径16mm的2层钢丝缠绕胶管,接头含适配套筒","参照标准":"GB/T 9065.2-2010"} |
| 异径管箍 | DN25*DN15 | 35.00 | 个 | {"规格型号":"DN25*DN15","公称直径":"25*15mm","公称压力":"2.5MPa","连接方式":"螺纹","材质":"铸铁","参照标准":"GB/T3287-2011"} |
| 不锈钢对丝 | DN15/304 | 10.00 | 个 | {"规格型号":"DN15/304","公称直径":"15mm","公称压力":"1.6MPa","材质":"不锈钢（304）","使用寿命":"36个月","参照标准":"GB/T26120-2010"} |
| 不锈钢对丝 | DN25/316L | 4.00 | 个 | {"规格型号":"DN25/316L","公称直径":"32mm","公称压力":"1.6Mpa","长度":"42mm","壁厚":"3.5mm","连接方式":"螺纹连接","材质":"316L不锈钢","特殊要求":"到货产品与技术要求不符，实行退换货处理，由此产生的费用由厂家承担。","使用寿命":"≥730天","参照标准":"GB/T 26120-2010","备注":"公称通径：DN25、螺纹：两端ZG1。"} |
| 气管变径接头 | Φ10-12 | 30.00 | 个 | {"规格型号":"Φ10-12","工作压力":"≤1.0MPa"} |
| 直角接头 | PL12-04 | 200.00 | 个 | {"规格型号":"PL12-04","工作压力":"0.9MPa","材质":"铜、塑合制","使用寿命":"3-4个月"} |
| 结晶器油快插接头 | 1/8 | 30.00 | 个 | {"规格型号":"1/8","工作压力":"7MPa","连接方式":"螺纹连接","材质":"黄铜","密封件材质":"*腈橡胶","适用介质":"油","特殊要求":"最高工作温度： 50℃, 阳接头+阴接头组合总长约：60±6mm，类型：双自封式","使用寿命":"1年","参照标准":"ISO7241-B标准"} |
| 管道调节阀 | φ12-M20 | 15.00 | 个 | {"规格型号":"φ12-M20","工作压力":"0.15~0.85Mpa","连接方式":"螺纹连接","材质":"不锈钢+塑料","密封件材质":"*腈橡胶","适用介质":"压缩空气","特殊要求":"接管口径:12mm,接头尺寸:1/2\"","使用寿命":"90天","参照标准":"GB/T 16693-1996"} |
| 快速直通 | φ12-10 | 210.00 | 个 | {"规格型号":"φ12-10","材质":"塑料","适用介质":"压缩空气","标准尺寸比":"12:10","连接方式":"直插式","特殊要求":"达不到技术要求供货商无条件给予更换或退货，产生费用由供货商承担。","使用寿命":"≥180天","参照标准":"GB/T 33636-2017","备注":"接管口径：10mm-12mm、使用流体：压缩空气、使用温度：0～60℃、使用压力：0.1～0.9Mpa、使用软管：PU管。"} |
| 镀锌活接 | DN32 | 8.00 | 个 | {"规格型号":"DN32","公称直径":"32mm","公称压力":"2.5MPa","连接方式":"螺纹","材质":"铸铁","参照标准":"GB/T3287-2011"} |
| 快速接头 | PCF6-4 | 50.00 | 个 | {"规格型号":"PCF6-4","工作压力":"0-1MPa","材质":"HP59黄铜、304不锈钢卡簧","适用介质":"压缩空气","特殊要求":"螺纹预涂聚四氟*烯","使用寿命":"≥12个月"} |
| 镀锌补芯 | DN40*20 | 4.00 | 个 | {"规格型号":"DN40*20","公称压力":"1.6Mpa","长度":"31mm","壁厚":"3.5mm","连接方式":"螺纹连接","材质":"玛钢","特殊要求":"无","使用寿命":"4380天","参照标准":"GB/T 3287-2011"} |
| 丝堵 | 20 | 45.00 | 个 | {"规格型号":"20","公称直径":"20mm","公称压力":"3Mpa","连接方式":"螺纹连接","材质":"镀锌","特殊要求":"无","使用寿命":"365天","参照标准":"GB/T 3287-2011"} |
| 快速接头 | PCF10-2 | 50.00 | 个 | {"规格型号":"PCF10-2","工作压力":"0-1MPa","材质":"HP59黄铜、304不锈钢卡簧","适用介质":"压缩空气","特殊要求":"螺纹预涂聚四氟*烯","使用寿命":"≥12个月"} |
| 快速接头 | PCF8-3 | 50.00 | 个 | {"规格型号":"PCF8-3","工作压力":"0-1MPa","材质":"HP59黄铜、304不锈钢卡簧","适用介质":"压缩空气","特殊要求":"螺纹预涂聚四氟*烯","使用寿命":"≥12个月"} |
