招标公告
项目名称：中海油服-绝对关节臂等设备更新改造项目
招标编号：0704-1940JDCP0519/01
1. 中化建国际招标有限责任公司（以下简称：招标代理机构）受中海油田服务股份有限公司（以下简称：招标人）委托，现对下列货物和服务进行公开招标：
货物名称：绝对关节臂等设备更新改造项目
数量：桥式三坐标测量机系统1套、柔性关节臂测量系统1套
项目概况：本项目购置设备，作为开展科学研究和提升产品质量的重要数据检测装置。
交货地点：
境内货物：完税后现场交货价至天津塘沽完井中心车间
境外货物：DDP交货至天津塘沽完井中心车间
技术参数：
桥式三坐标测量机系统主要技术指标：
1)测量机量程：X≥890mm, Y≥1990mm, Z≥790mm
2)设备外型尺寸：W≤1480mm，L≤2970mm，H≤3030mm
3)长度测量最大允许误差：MPEE(E0/E150) ≤1.5 + 2.8 L/1000（μm）
4)单探针形状最大允许误差：MPEP (PFTU)≤ 1.5（μm）
5)扫描探测最大允许误差：MPE(THP/t) ≤ 2.5/45（μm/s）
6)重复精度最大允许误差：MPL(R0) ≤ 1.4（μm）
柔性关节臂测量系统主要技术指标：
1)测量机量程：6轴关节臂式测量机：测量直径为2.5m（第一关节到第六关节长度不小于1.25m），最大测量范围为2.7m
2)最大允许长度测量误差（E UNI）≤0.028mm，
3)最大允许接触式尺寸测量误差（P SIZE）≤0.010mm
4)最大允许接触式形状测量偏差（P FORM）≤0.020mm#中国采招网 （bidcenter.com.cn）
5)最大允许接触式位置测量偏差（L DIA）≤0.035mm
交货期：
国内交货期与国外交货期相同
桥式三坐标测量机系统：合同签订后30天内交货
柔性关节臂测量系统：合同签订后60天内交货；?????
资金到位或资金来源落实情况：已落实
项目已具备招标条件的说明：已具备
是否接受联合体投标：本次招标不允许联合体投标
2.资格标准：
投标人所投设备应为制造商的成熟产品，买方不接受新试制产品。投标人为制造商或有代理资质的代理商,代理商需提供有效的代理证明文件。
投标人所投产品资质与业绩要求：
2016年1月1日-2018年12月31日期间，提供制造商的绝对关节臂系统合同业绩10套、提供制造商的三坐标仪系统合同业绩10套，提供业绩表，并附对应的合同，业绩表包含设备名称、用户名称、规格型号、证明人、合同签订日期、联系电话等信息；投标人提供的业绩不满足要求或证明材料不全的，其投标将被拒绝。
制造商需具备ISO9001或VDA6.4质量认证，并提供证书复印件。
制造商具有国内工厂或者办事处，且具备通过CNAS认证的实验室，并提供工厂或办事处照片、地址信息和联系人信息。
未领购招标文件是否可以参加投标：不可以
3.有兴趣的合格投标人可通过以下方式获取招标文件：
从2019年9月25日开始至2019年10月8日止，在中国海油采办业务管理与交易系统（https://buy.cnooc.com.cn）购买招标文件（电子版）。投标人须在线填写购买招标文件登记表，并在线支付标书款至指定账户。在线支付成功后，投标人可自行下载招标文件。招标文件每套售价为2000元人民币或300美元（收款人：中化建国际招标有限责任公司，美元开户行：交通银行北京分行和平里支行，美元账号：********查看详情********查看详情07037，SWIFTCODE:COMMCNSHBJG），售后不退。
4.投标文件递交截止时间和地点：所有投标文件都应附有按规定提交的投标保证金，并于2019年10月22日上午10:00时（北京时间）前递交至北京市东城区东直门外小街6号海油大厦4层418会议室。
5.开标时间：定于2019年10月22日上午10:00时（北京时间）开标。届时邀请参加投标的代表出席开标仪式。开标地点：北京市东城区东直门外小街6号海油大厦4层418会议室。
6.本次招标公告同时在机电产品招标投标电子交易平台（www.chinabidding.com）上发布。
7.投标人在投标前需在机电产品招标投标电子交易平台上完成注册。评标结果将在机电产品招标投标电子交易平台公示。
招标人：中海油田服务股份有限公司
地址：中海油田服务股份有限公司采办共享中心（河北省三河市燕郊行宫西大街81号）
邮政编码：065201
联系人：费健杰
电话：+86-****-*******查看详情
邮箱：feijj@cosl.com.cn
招标代理机构：中化建国际招标有限责任公司
地址：北京市东城区东直门外小街6号海油大厦4层
邮编：100027
联系人：邱焱娇
联系电话：+86-10-********查看详情
电子邮箱：qiuyj@cnooc.com.cn
Project: COSL-Absolute Joint Arm and Other Equipment Renewal and Reconstruction Projects
Bid No:0704-1940JDCP0519/01
1.CNCCCInternational Tendering Co., Ltd. (here in after called “Tendering Agent”),for?and on behalf of China Oilfield Services Ltd. (here in after called"Purchaser")invites sealed bids from eligible bidders for the supply?of following equipment:
Goods Name:Absolute Joint Arm and Other Equipment Renewal and Renovation Projects
Quantity: Bridge CMM System 1, Flexible Joint Arm System 1
1. Project?Profile:
This?project purchases equipment as an important data detection device to carry out?scientific research and improve product quality.
Delivery?Schedule:
From?within PRC：Delivered to Construction Site of Tianjin Tanggu Well well completion Center Workshop,P.R.China.
From?outside PRC：DDPDelivery to Tianjin Tanggu Well well completion Center Workshop
Domestic?Delivery Date is the same as Foreign Delivery Date
Bridge CMM System: Delivery within 30?days after signing the contract;
Flexible Joint Arm Measurement System: Delivery within 60days after signing the contract
Source of Funds：Yes
Description of The Prepared Bidding Conditions：Yes
Joint Bids：NOT?Available
Technical parameters:
1. Technical parameters:
Main technical specifications of bridge CMM system:
1) Measuring range: X (> 890mm), Y (> 1990mm), Z (> 790mm)
2) Size of equipment: W < 1480mm, L < 2970mm, H < 3030mm
3) Maximum allowable error of length measurement: MPEE (E0/E150) = 1.5 + 2.8 L/1000 ( m M)
4). Maximum allowable error of single probe shape: MPEP (PFTU) = 1.5( m M)
5) Maximum permissible error of scanning detection: MPE (THP/t) = 2.5/45 (m M/s)
6). Maximum allowable error of repetition accuracy: MPL (R0) = 1.4 (micron)
Main technical specifications of flexible joint arm measurement system:
1) Measuring range: 6-axis joint arm measuring machine: measuring diameter is 2.5m (the length of the first joint to the sixth joint is not less than 1.25m), the maximum measuring range is 2.7m.
2) The maximum allowable length measurement error (E UNI) is less than 0.028 mm.
3) Maximum Permissible Contact Size Measurement Error (P SIZE) = 0.010mm
4) Maximum Permissible Contact Shape Measurement Deviation (P FORM) = 0.020mm
5) Maximum allowable contact position measurement deviation (L DIA) = 0.035 mm
2. Qualification Requirements:
The?equipment provided by the bidder shall be the mature products of themanufacturer, and the buyer shall not accept the new trial-produced products. The?bidder shall be the manufacturer or agent qualified, and the agent shall?provide valid proof of agency.
Qualifications?and Performance Requirements of the Products Invested by Bidders: During theperiod from January 1, 2016 to December 31, 2018, 10 sets of ?contract of the manufacturer"s absolute joint arm system and 10 sets of contract of the manufacturer"s coordinate measuring system areprovided, together ,Provide performance sheet with corresponding contract. Performance sheet includes equipment name, user name, specification model, certifier, contract signing date, contact telephone and other information.
If the performance provided by the tenderer does not meet therequirements or the supporting materials are incomplete, the tender will berejected.
Manufacturers?should have ISO 9001 or VDA6.4 quality certification and provide copies of?certificates.
The?manufacturer has a domestic factory or office, and has a CNAS certified?laboratory, and
Bid?without the bidding documents：Available?NOT
3. All those who are willing to?participate in the bids are kindly requested to :
enter into websitehttps://buy.cnooc.com.cn to?purchase the bidding documents (electronic edition) on line?from 25 September 2019 to8 Octomber 2019?upon?non-refundable?payment?of?RMB2,000 or USD300 for each copy.（Beneficiary:CNCCCInternationalTenderingCo., Ltd., Name of Bank: Bank of CommunicationsBeijing?Branch?HepingliSub-branch; USD A/C No.: ********查看详情********查看详情07037,?SWIFT Code: COMMCNSHBJG). After well well completion?of the remittance, the bidder could download the bidding documents.
4. Deadline and place for submission of bid: Bids must be delivered?toRoom 418,?4th.Floor,?CNOOC Tower,?No.6?Dongzhimenwai Xiaojie,?Dongcheng?District, Beijing 100027,?P.R. China?for submission of?bids before?10:00?a.m.(Beijingtime)?on?22?Octomber?2019 .
5. Bids will be openedin the presence of bidders" representatives who choose to attend at 10:00 ?P.R. China.?Dongzhimenwai Xiaojie,Dongcheng District, Beijing100027,?4rd.Floor,CNOOC Tower, No.6?Room 418,?at?22, 2019?Oct.
6. The Invitation for Bids is issued on the website ofwww.chinabidding.comsimultaneously.
7. The bidder needs toregister before the tender onwww.chinabidding.com. And the evaluation resultswill be release don www.chinabidding.com.
Name of Purchaser: China Oilfield Services Ltd.
Address: COSL Supply Chain Management Center.（81 Xinggong West Street, Yanjiao, Sanhe City, North Province） 065201
Contact Person: Fei Jianjie
Telephone: +86-********查看详情065
E-mail:feijj@cosl.com.cn
Name of Tendering Agent: CNCCC International Tendering Co., Ltd.
Detailed Address: Floor 4,CNOOC Tower, No.6 DongzhimenwaiXiaojie,DongchengDistrict,Beijing 100027, P.R. China
Post Code: 100027
Contact person: Qiu Yanjiao
Telephone: +86-10-********查看详情
E-mail:qiuyj@cnooc.com.cn
